 |
Details |
 |
| |
1. Standard oil injectors (low-inertia and orifice-plate type)
Catalogue:
ISO7440B64-20.7 (BOSCH NO:1 688 901 101)，
ISO7440B64-25.0 (BOSCH NO:1 688 901 102)，
ISO7440B74-20.7 (BOSCH NO:1 688 901 103)，
ISO7440B74-25.0 (BOSCH NO:1 688 901 104)，
ISO7440B84-20.7 (BOSCH NO:1 688 901 105)，
ISO7440B84-25.0 (BOSCH NO:1 688 901 106)，
ISO7440B54-20.7 (BOSCH NO:1 688 901 109)，
ISO7440B54-25.0 (BOSCH NO:1 688 901 110)，
Used primarily for checking and adjusting injection pumps Type PW, PB, PN, PW2000, P7, P7100, BQ, IW, PL, PM
2. Standard oil injectors (orifice-plate type)
Catalogue:
ISO07440A44-20.7 (BOSCH NO:1 688 901 015)，
ISO07440A54-20.7 (BOSCH NO:1 688 901 016)，
ISO07440A64-20.7 (BOSCH NO:1 688 901 017)，
ISO07440A74-20.7 (BOSCH NO:1 688 901 018)，
ISO07440A84-20.7 (BOSCH NO:1 688 901 019)，
ISO07440A64-17.2 (BOSCH NO:1 688 901 020)，
Used primarily for checking and adjusting injection pumps Type A, I, B, Z, VE, IW
3. Standard oil injectors (shaft needle type)
Catalogue:
ISO7440A14-17.2 (BOSCH NO:0 681 343 009)，
ISO7440A14-14.7 (BOSCH NO:1 688 901 000)，
Used primarily for checking and adjusting injection pumps Type I, II, B, A
4. Standard oil nozzles (accessories)
Standard oil nozzles (shaft needle type) are use for oil injectors (shaft needle type). Our DN12SD12 standard oil nozzles are produced according to ISO4010 standards, applicable for the oil feeding capacity≤150mm? Cycle. |
|
|
|
 |
|
 |
|
